For several years, the question of whether antibiotics can be mixed with poultry vaccines has been raised and debated on forums. Some say they can, some say it is ineffective, and some say they cannot. However, no one has ever explained why they can or cannot be mixed, what harm adding antibiotics to vaccines might cause, or what the disadvantages are; which antibiotics to add, how much to add, and how to add them. The following is an explanation of this issue.
Why add antibiotics to poultry vaccines?
Go back to 2000 years ago. At that time, commercial layer chicks hatched at many hatcheries commonly had pullorum disease caused by Salmonella, resulting in severe chick mortality within 7 days of hatching and causing considerable losses for farmers and hatcheries. At the time, to eliminate pullorum disease, breeder farms used large doses of quinolone antibiotics in parent stock, but this was like a drop in the ocean and had poor results. There was no choice but to find a solution for the chicks. One hatchery gave newly hatched chicks ciprofloxacin in their drinking water at 20 times the dose stated in the instructions for use, with fairly noticeable results. However, this approach had two problems: first, sending chicks to farmers with antibiotics gave the impression of “a silver ingot buried here, yet no one knows.” In addition, this dose unexpectedly resulted in high medication costs for the hatchery. The contract between the hatchery and the farmer stipulated that the hatchery was responsible for losses from chick deaths within 7 days of age, so the hatchery would do everything possible to control chick mortality within 7 days. Any deaths after 7 days were the farmer’s responsibility. Against this background, foreign pharmaceutical companies saw a business opportunity. At that time, the Marek’s disease vaccines used in chicks were mostly imported, with few domestically produced products. Freeze-dried cephalosporin injections specifically intended for mixing with Marek’s disease vaccines, produced by several foreign veterinary drug manufacturers, gradually entered hatcheries. Before 2010, these companies’ products specifically made for mixing with Marek’s disease vaccines brought profits of dozens of times their cost. Less than two years later, Qilu successfully developed and began producing freeze-dried cephalosporin injections. Their price advantage gradually displaced imported products. This is how antibiotics came to be used with Marek’s disease vaccines, and this practice is still used today.
In addition to mixing antibiotics into Marek’s disease vaccines as described above, there are currently many examples of mixing antibiotics into live and inactivated vaccines. Antibiotics are mixed into oil-based vaccines when they are injected into commercial layer chickens. After commercial layers begin laying, they need to be injected with highly pathogenic avian influenza and Newcastle disease inactivated vaccines every 3 months. Injecting laying flocks with oil-based vaccines will affect egg production to some degree. The effect is minor in flocks that are in good condition, well nourished, and housed in a good environment, but greater in flocks in poor condition. To reduce the resulting economic losses, farmers have for many years added antibiotics to oil-based vaccines to reduce vaccine stress. Over the past two years, because the state has prohibited the use of antibiotics in laying hens, this practice has gradually declined in laying flocks. Instead, farmers often use traditional Chinese medicines that boost immunity and provide vitamins in drinking water to reduce stress in the flock. In recent years, antibiotics have more commonly been added to oil-based vaccines when pullets are injected with infectious coryza oil-based vaccines. Because these vaccines can release excessive endotoxins, they may cause pronounced injection reactions, prevent absorption of the oil adjuvant, and, in severe cases, cause swelling and inflammation at the injection site. Mixing in cephalosporin antibiotics can clearly alleviate these symptoms and reduce vaccine-related stress.
Antibiotics are often added to live vaccines as a necessary measure when a flock is ill. For example, if a flock develops atypical Newcastle disease and requires emergency CS2 vaccination, mixing freeze-dried cephalosporin injections into the vaccine can treat the disease more quickly and effectively. Currently, antibiotics are most often mixed into vaccines when treating Mycoplasma synoviae. The main antibiotics used are cephalosporins, kanamycin, and lincomycin-spectinomycin. Some people ask, why not simply give antibiotics in drinking water? Why mix them with the vaccine? They also say that a single antibiotic injection is not effective. In fact, antibiotic injection and administration in drinking water are two different things, and their effects are quite different. Otherwise, farmers would surely not go to the trouble of injecting if the problem could be solved with medication in drinking water. The key is still effectiveness. Also, injecting the vaccine and antibiotics separately is even less practical. On the one hand, this increases farmers’ workload; more importantly, it also causes more stress to the flock, which is instead detrimental to its health.
Adding antibiotics to live vaccines can effectively suppress the stress caused by the cytokine response induced by the vaccine. This is particularly important when vaccinating a sick flock, as vaccination can cause significant side effects and thereby affect the immune response to the vaccine. After antibiotics are mixed in, the flock appears calmer, and the disease clears up more quickly and reliably. One farmer from Zhangjiajie on our forum had a flock that had been ill for nearly a month, with scattered deaths during that period. Various medications had not helped, and administering IV strain vaccine in drinking water had not brought any noticeable improvement. Some said it was influenza and that a vaccine must never be used, because vaccinating during an outbreak could wipe out the entire flock. After using medication for many days, the farmer found that the flock was getting worse the more medication was used. With no alternative, the farmer then administered Newcastle disease CS2 at 4 times the dose plus a ceftiofur freeze-dried injection. The flock’s condition improved the next day and deaths decreased; it recovered two days later. This is the difference between injection and administration in drinking water. If CS2 were injected alone and the antibiotics given in drinking water, the flock would also gradually improve, but not as quickly.
In summary, antibiotics are mixed into vaccines mainly to reduce labor, lower stress responses in the flock, and quickly eliminate flock diseases.
Can antibiotics be added to vaccines during vaccination?
First, let us discuss adding antibiotics to live vaccines. In 2008 year, 9 month, at the Chinese Society of Animal Husbandry and Veterinary Medicine conference held in Yangzhou, Academician and Professor Liu Xiufan of Yangzhou University presented a research report on mixing cephalosporin antibiotics into Marek’s disease vaccine. His conclusion was that the pH and osmotic pressure of the antibiotics can affect the effectiveness of Marek’s disease vaccine, so they should be used with caution. Note that he said “use with caution”; he did not say they must not be used. Why? Because Academician Liu Xiufan’s research found that mixing antibiotics into Marek’s disease vaccine does affect its effectiveness to some extent, but not significantly—not enough to reduce the vaccine’s effectiveness or render it ineffective. Theoretically, however, caution is still warranted. Companies, by contrast, mainly consider that as long as there is no obvious impact, they will continue using them to improve their economic returns.
Dr. Du Yuanzhao of Qingdao Yebio once announced his research findings at a meeting. At the time, many farmers added antibiotics to feed over extended periods, such as anticoccidial drugs and oxytetracycline. Would this affect chickens when they were immunized with live Newcastle disease vaccine? The comparison showed no difference.
Recently, at several technical exchange meetings held by Yebio, Dr. Liu Dong of Yebio presented a report on the effects of adding antibiotics to oil-emulsion vaccines. Through repeated experiments, he found that adding antibiotics to oil-emulsion vaccines can cause the adjuvant to denature and separate out, and the antibiotics to mix unevenly, thereby affecting the vaccine’s immunizing effect. This raises questions about which antibiotic to add, how to add it, and how much to add.
If there is a genuine need to add antibiotics to an oil-emulsion vaccine, do so with caution. This is not as casual, easy, or uniform as adding antibiotics to a live vaccine. Do not add more than 30 ml of liquid to a bottle of 500 ml oil-emulsion vaccine. Be sure to use a dual-phase solubilizing and sustained-release solution made with Span-80, aluminum stearate, and Tween-80 to dilute the antibiotic. After mixing it into the oil-emulsion vaccine, shake it for at least 1 minutes. Never add liquid antibiotics such as kanamycin directly; they cannot be mixed uniformly with the oil-emulsion vaccine. If too much is added, it will not only affect the stability of the oil emulsion but may also cause uneven antibiotic distribution, leading to drug poisoning in the flock.
As for how much to add: if the purpose is to prevent vaccine stress, there is no need to add much antibiotic. Adding 2 grams of cephalosporin to a bottle of 500 ml oil-emulsion vaccine is sufficient. If the purpose is to treat disease, mixing it with live Newcastle disease vaccine for emergency vaccination of the flock, 1 grams of cephalosporin for 300 adult chickens will have a noticeable effect. If cost is no concern, 1 grams of cephalosporin lyophilized powder for injection for 200 adult chickens is also acceptable. Is human-use ceftriaxone suitable? What about cephalosporin powder for injection? The answer is that it is not recommended; it is best not to use it. This is because dedicated cephalosporin lyophilized powder for injection is formulated to have a neutral pH. When human-use ceftriaxone is mixed with the vaccine, the color changes noticeably and the liquid becomes cloudy, affecting the vaccine’s effectiveness.