For broiler breeder parent stock, detailed management during the brooding period is particularly important for the chicks’ future health, uniformity, and production performance. This includes brooding details and techniques, as well as the use of brooding equipment and related precautions. The following explains these in detail in eight areas.

  一、Closed Brooding

  All brooding staff eat, live, and work in the brooding house for 28~35 days. Feed is transported by a dedicated vehicle. It is best to have all feed for the brooding period ready in advance, and to disinfect the supplies used by the brooding staff. All items that must be brought inside need to be thoroughly disinfected.

  二、Quantities, Placement, and Use of Brooding Supplies

  1, brooding umbrella

  Electric-heated type: 500 chicks per umbrella; liquefied gas infrared type: 500–1 000 chicks per umbrella, infrared height 1.0–1.3 meters, angle 30 degrees. Adjust the height of the umbrella according to the ambient temperature. Adjust the duration of umbrella heating automatically according to the ambient temperature or manually. Frequently check whether the tees and connectors on the liquefied gas cylinder are leaking, whether the electric igniter on the brooding umbrella works properly, and use soapy water or shampoo solution. For suspended natural gas heating, ensure the temperature is uniform throughout the heated area. If necessary, place sheet iron or steel sheet beneath the heating pipe to redistribute the downward-radiated heat evenly a second time.

  2, temperature and humidity meter

  Two per house or one per pen; they should be hung at the edge of the partition board (temperature and humidity meter and mercury thermometer).

  3, partition boards

  For chicks aged 0–3 days, use 10–20 boards per 800 chicks; add more as needed thereafter, according to the ambient temperature and the condition of the chickens. Connect the partition boards with plastic cable ties used by electricians or 20-gauge iron wire. Cover the lower corners where the partition boards connect with plastic sheeting so chicks cannot get through. Arrange the partition boards in a stable structure, such as a zigzag. Do not form a very narrow angle between two boards.

  4, brooding rack netting or mesh

  Overlap the nets by 25–30 centimeters. Flatten the overlapped sections. Repair any holes in the netting to prevent chicks from falling through beneath the rack.

  5, feed trays and drinkers

  Starter trays: 1–7 days, 100 per unit; auxiliary feeding equipment must also be added to ensure adequate feed space. Drinkers: one 4-liter drinker for 50 chicks during 1–7 days. Arrange feed trays and drinkers alternately, with a distance between them of at least enough for two chickens to eat and drink while one chicken passes through. When using electric brooding hovers, place the feed trays and drinkers at the edge of the hover. Prepare a container with a capacity of one liter to fill the drinkers (filling must be highly accurate).

  6, litter

  When brooding on litter, the litter must be at least 2 cm thick (not on a floor; on a floor, it must be at least 8 cm thick). Place bricks or wooden blocks under the drinkers to prevent litter from contaminating them.

 III. Temperature

  Heat the brooding house before the chicks arrive. In winter, start heating 3 days in advance; in summer, heating one day in advance is sufficient. If it is difficult to raise the temperature inside the house, and cold air enters at the doorway and exhaust-fan end, plastic sheeting can be hung in two rooms at each end. The temperature in the brooding house should be above 28 degrees, and the temperature under the brooding hover should be 32–34 degrees. Lower the temperature by 3 degrees each week until it reaches 21–23 degrees. Adjust the heat according to the flock’s response to temperature. If the day–night temperature difference is large, or it is cold outside, raise the temperature by 2℃ at night. When the temperature inside the house is relatively low, turn on the attraction lights to gather the chicks under the hover. A mercury thermometer is best for checking the temperature.

  Check the temperature and the chickens’ distribution frequently (especially during the first few days) to prevent large temperature differences in different parts of the house at different times. When the chickens huddle together, take heating measures and apply comprehensive heat-retention measures. Check for air leaks to prevent drafts that cause the temperature in certain areas of the house to be too low; ideally, keep the temperature basically uniform throughout the house.

 IV. Humidity

  For the first 1 to 7 days of brooding, the relative humidity should be 60% to 70%. Higher humidity in the poultry house is especially important for chicks transported over long distances and for chicks hatched from eggs laid by hens that have just started laying. When humidity is relatively low, sprinkle water to increase it. When humidifying, consider the area and location where water is sprinkled. To avoid lowering the temperature, sprinkle warm water; to lower the temperature, sprinkle cool water. Use a temperature and humidity meter to calculate relative humidity. (Provide the corresponding forms.)

  The condition of the chickens’ feet, shanks, and feathers can indicate whether the humidity in the poultry house is appropriate. People’s physical sensations and breathing can also indicate whether the humidity is appropriate. If the humidity is too high, it can be addressed through ventilation. Humidifying with a spray is also feasible.

  Five. Drinking Water

  It is recommended that chicks be given warm boiled water at 0 to 3 days of age. If warm boiled water is not available, consider warming the water inside the poultry house. The drinking water for chicks should be above 20 degrees, but not warmer than the temperature inside the poultry house.

  After chicks are placed in the poultry house, provide water and feed at the same time. Herd or train the chicks to drink; if necessary, teach each chick to drink. Check the chicks’ water intake and feel their crops. Perform necropsies on chicks that die or are culled on the second day of age. Add 5% to 8% glucose to the first drinking water (the sugar water should preferably be consumed within 3 hours and given only once). This is especially important for chicks transported over long distances and chicks hatched from eggs laid by hens that have just started laying. You can also give them 2% to 5% brown sugar water.

  After the glucose water has been consumed, provide an electrolyte multivitamin solution or plain water. Antibiotics are not recommended on the first day, but may be given on the second day (consider whether to medicate on the first day based on your own environment).

  For water containing medication, use a measuring container to distribute the water evenly among the drinkers. Do not add too much water each time. During the first few days, 1.5 liter per refill is recommended so that the water can be changed and the drinkers cleaned frequently, preventing bacterial growth (this is especially necessary after replacing the water with fresh water).

  Clean the drinkers at least twice a day and disinfect them once with a non-toxic disinfectant. Keep the drinkers upright to prevent spills. Distribute the drinkers evenly, not too close to the fence panels or feed trays (leave enough space for at least two chickens to eat and drink and for one chicken to pass through).

  During the first few days, use stronger lighting to encourage the chicks to drink more water and become familiar with eating (light intensity no less than 60 lux or an energy-saving lamp of 18 watts). Closely monitor changes in the flock’s water consumption and record it. After the chickens are placed on the floor (depending on the height of the raised platforms), mainly observe whether 100% of the flock can get onto the platforms. You can also spend 3 days driving the chickens onto the platforms to drink, to prevent dehydration. Provide VC in the drinking water on days 4–7; this helps the chicks develop their frames and improves the hatching rate during the laying period. When replacing the drinkers with automatic drinkers, gradually remove the original drinkers by placing them near the automatic ones, so the chicks can get used to the new environment. Clean the drinking-water system regularly after starting up the automatic water line.

  VI. Feeding

  Provide one feed tray for every 100 chicks (0–7 days of age). For the first three days, spread auxiliary feed paper or colored plastic sheeting and scatter feed on it. Up to 7 days of age, feed 4–6 times daily; gradually reduce this to once a day thereafter. At 1–3 days of age, feed 6 times; at 4–7 days of age, 5 times; at 8–10 days of age, 4 times; at 11–14 days of age, 3 times; and at 15–17 days of age, 2 times. Regularly check the feed for mold or clumping (the attendants should check it while distributing the feed). If any problems are found, stop feeding that batch. Wash the feed trays at least once a day. Record how long it takes the chicks to finish the feed. After adding feed each time, immediately drive the chicks to eat, making sure every chick goes to the feed, and check how they are eating. Increase the depth of feed and the number of feedings when beak trimming is performed (currently, pullets are not beak-trimmed; the males only need their beaks cauterized). Use stronger lighting during the first few days to encourage the chicks to eat. According to the feed standard, distribute the feed for each feeding evenly among all feed trays and each pen; spread the feed evenly in the trays. When feeding, check whether there are too few feeding spaces, and add trays and expand the pen as needed (preferably expand the pen according to age, adding feed trays as well). During inspections, identify the smaller chicks and place them in a separate pen for individual feeding to improve flock uniformity. Complete feed changes over three days. When stress occurs, such as during vaccination or beak cauterization, add multivitamins (in the drinking water or mixed into the feed).

  VII. Lighting

  Distribute the lamps appropriately in a crisscross pattern so that light intensity is uniform throughout. After 7 days of age, light intensity can be reduced to 8–10 lux. Replace burned-out bulbs promptly, adjust the timer according to the lighting schedule, and strictly follow the brooding-period lighting schedule. Light shields at the air inlets and exhaust-fan ends must not allow light to leak through. Light intensity: no less than 60 lux from 0 to 7 days of age; from 7 days of age until the lighting period is increased, 8–10 lux. When reducing the lighting duration, reduce it in both the morning and evening; 8 hours is recommended (morning: 8:00–16:00).

  VIII. Ventilation

  Provide less ventilation and air exchange at 0–7 days of age (depending on the house structure). When ventilating, also take into account the temperature, humidity, and air quality inside the house (people can detect poor air quality, ammonia odor, stuffiness, etc.). When a higher temperature is required: a. Use a brooder hood to warm the house before ventilating; b. Ventilate when the weather is warmer; c. Ventilate through several short periods. Ventilation must not cause major temperature fluctuations inside the house. In cold weather, ventilate more frequently but for shorter periods each time to achieve air exchange. Never let air blow directly onto the chickens; cover the air inlet so the air flows upward. Air speed must not be too high, especially when the outside temperature is low (the air inlet and exhaust-fan opening can be made smaller). Timed, temperature-controlled ventilation equipment can be used, but it must be accurate, properly adjusted, and checked regularly. Where AC2000 environmental management equipment is available, it is best to use it.

  General principle: Management of parent-stock broiler chickens during the first 4 weeks of age is an important stage in the entire rearing cycle and directly affects the flock’s subsequent production performance. Whether the flock grows healthily during the brooding period depends entirely on the attendants’ careful management. Attention to detail is the only way to achieve the goal.