I. Brooding stage

  The first 72 hours of a chicken’s life are particularly important. They determine not only its ability to resist disease, the development of its cardiovascular system, and the growth of its body feathers, but, more importantly, the development of its skeleton. Only when breeder males develop a good skeletal structure during the brooding and rearing period can they mate effectively throughout the laying period.

  To give chicks a good start, ensure that their body weights meet the targets at 7, 14, 21, and 28 days of age. If male body weight meets the target at 28 days of age, flock uniformity will be ideal. If beak trimming is carried out during the first week, take extra care, as improper beak trimming remains one of the main causes of poor flock uniformity.

  After 14 days of age, the biggest factor affecting flock uniformity is whether breeder males can access and consume their allotted feed. Uniformity among breeder males is critical. To maintain good uniformity, the feeding system must provide the correct amount of feed to all males at the same time. Observe the birds’ behavior closely, especially when transitioning from manual feeding to an automatic feeding system, to ensure that feed is distributed evenly and the flock grows uniformly.

  Two. Rearing phase

  While achieving the correct body weight growth curve, the uniformity of male breeders should be maintained between 80% and 85% from 35 days of age onward, so that the birds are at roughly the same stage of sexual maturity when mixed and mated. The specified standard body weight should be achieved by 8 weeks of age at the latest.

  Selecting pullets for breeding at 5 weeks of age is important. When selecting them for the first time, focus on body weight. Feed restriction is not necessary before selection. Strictly cull birds with defects such as leg or skeletal problems, or poor feather coverage. Maintaining a uniform flock size requires appropriate stocking density, feeding space, and feed consumption during rearing. If necessary, the flock can be divided into separate pens at 10 weeks of age. However, grading after 10 weeks of age offers no benefit at all, because by then the birds' skeletons are already 85 percent fully developed, and managers have no further opportunity to influence skeletal development through any additional efforts.

  A flock density of 3–3.5 birds/m² is suitable. With a fixed-frame feeding system, a feeding space of 10 cm/bird is also acceptable: 15 cm/bird at week 10, and 18 cm/bird at week 15.

  By 8 weeks of age, 85% of the birds’ skeletal development is essentially complete. It is therefore crucial to meet, or even exceed, the early body-weight targets at this stage. Otherwise, mature broiler breeders will be smaller than the optimum body size. Without a good skeleton, broiler breeder males tend to become overly fat, with fat deposits accumulating, and their body condition will be poor toward the end of the laying period, which will limit mating success.

  Between 10 and 15 weeks of age, the testes of broiler breeder males begin to develop. It is especially important to ensure continuous weekly weight gain during this stage; otherwise, any weight loss during this period will affect testicular development. It will also affect sperm production toward the end of the laying period. Starting at 15 weeks of age, the birds’ reproductive systems develop rapidly, so it is essential to feed according to the body-weight growth curve up to the start of the laying period, especially when males and females are housed together. For this reason, stocking density and uniform feed distribution are especially important from 10 weeks of age until mixing.

  Three. Laying stage

  Before moving to the laying house, the cockerels must undergo a final selection. The selected cockerels must have good uniformity, an upright posture, and well-developed body conformation. Cockerels with leg or skeletal defects must not be selected for breeding, as they often fail to mate successfully and may even injure the hens. Their stage of development should be as close as possible to that of the hens. Selected breeder males should have bright eyes, straight toes, good shank length, normal comb color, a straight back, normal footpads, and no damage to their beaks from trimming. Pay attention to consistency in the sexual maturity development of males and females before and after mixing.

  It is best to move the cockerels into the hens’ laying house 24 hours before the hens are moved in. This helps the cockerels find feed and water and ensures good weekly weight gain. Unsatisfactory weekly weight gain before and after mixing will seriously affect fertility rates in both the early and later stages. The most critical factor during the laying period is to continue controlling the breeder males’ body weight and ensure that they are in good physiological condition for mating.

  During the laying period, separate-sex feeding remains the only way to strictly control the body weight of breeder males. In the laying house, the feeding system for any type of male must provide uniform feeder space for all breeder males, preventing hens and dominant males from stealing feed intended for other males. In addition, because some males will be culled during the laying period, the feeding system should allow males to eat quickly and be adjustable so that each male can obtain and maintain an adequate share of feeder space.

  Installing a grill on the hen feeders to prevent breeder males from stealing hen feed is the most widely used and effective system. The grills should be checked during daily feeding to ensure that all breeder males are effectively prevented from feeding at them, while hens can feed easily.

  Whether male breeders or female breeders, feed must be distributed evenly throughout the entire house, and its effectiveness must be observed throughout the production cycle. In addition, regularly sampling the males’ body weights is necessary to correctly assess whether the feeding program is working properly, ensure that the males achieve good weekly weight gains, and make precise adjustments to increases or decreases in feed amounts.

  Where perches are used in breeder layer houses, carefully observe the behavior of the female breeders. If the female breeders hide under the nest boxes or remain on the perches while the male breeders wander on the floor, mating behavior will rarely be observed. This situation can result in a very poor hatchability rate for the flock. As soon as possible, remove 1~2 males for every 100 females to prevent this from becoming a pattern and to prevent the females from avoiding the males. In the late afternoon, staff should walk back and forth on the floor and scatter some coarse limestone or cracked corn to encourage the females to come down from the perches to the floor and increase opportunities for mating.