Corn accounts for 60% of layer feed and is an important source of energy in feed formulations. At this time each year, as stocks of old-crop corn are gradually used up, new-crop corn begins to replace old-crop corn in layer feed production.
 
  New corn loses few nutrients such as amino acids and vitamins, and is readily available at a low price. However, improper use can easily cause problems in the flock, such as ruffled feathers, loose droppings, and a decline in the egg-laying rate.
 
  During the use of new corn, people pay close attention to moisture content data because the moisture content of new corn directly affects feed formulations. To make good use of new corn, there is another indicator that some farmers often do not pay sufficient attention to: the mycotoxin levels in newly harvested corn.
 
  I. What are mycotoxins?
 
  Mycotoxins are toxic metabolic products produced during mold growth in grains or feed. Hundreds of mycotoxins have been identified to date, and they are present in almost all feed ingredients. Corn, in particular, is a major source of mycotoxins in feed for laying hens.
 
  Two: Why should we pay attention to mycotoxins in new corn?
 
  Common mycotoxins found in corn include aflatoxins, ochratoxins, zearalenone, vomitoxin, and T-2 toxin. They have the following key characteristics, which make it essential for us to take them seriously.
 
  1, mycotoxins can cause significant losses in laying hen farming.
 
  Mycotoxins are metabolized in chickens to produce toxic metabolites, which can cause various types of damage to their bodies. Aflatoxins can impair liver function, while deoxynivalenol can reduce feed intake and cause vomiting. Zearalenone can lead to reduced reproductive capacity.
 
  2, mycotoxins continue to be produced during the storage of corn.
 
  Mycotoxins are produced in corn while it is in the field, but this does not mean that mycotoxin levels remain unchanged after harvest. High moisture content in new corn, damp storage conditions, poor ventilation, and other factors can all lead to rapid mold growth and the continued production of mycotoxins, causing mycotoxin levels to keep increasing.
 
  3, mycotoxins are time-sensitive.
 
  Some livestock farmers may think, “I tested last year’s corn for mycotoxin levels, so this year’s should be about the same.” That is not necessarily the case. Since mycotoxins are produced by mold, their levels can be easily affected by factors such as temperature, weather, and the environment during corn growth. As a result, the absolute levels and distribution of mycotoxins can vary greatly from year to year.
 
  4, mycotoxins are region-specific.
 
  Logistics systems are now well developed, and everyone tries to choose cost-effective corn suppliers when purchasing corn. At this point, it is important to note that the types and levels of mycotoxins in corn can vary considerably from one region to another, so as to avoid unnecessary losses.
 
  Third, how can the negative effects of mycotoxins in new corn be reduced?
 
  So, how can we minimize the negative effects of mycotoxins when using new corn? Here are a few suggestions.
 
  1, strictly control the moisture content of the corn.
 
  The moisture content of new corn must be reduced by sun-drying or drying to ≤14%, to prevent mold during storage.
 
  Monitor the corn storage environment. Ensure adequate ventilation in the warehouse and keep humidity within a reasonable range. Make sure the warehouse roof, doors, and windows are waterproof. Check for leaks during rainy weather.
 
  2, control moldy kernels.
 
  Increase inspection efforts during corn procurement and preferably keep moldy kernels within the range of 1%.
 
  Monitor mycotoxin levels in advance. Before using new corn, monitor its mycotoxin levels. Generally, monitoring several common toxins is sufficient, including aflatoxin AFB1, zearalenone, vomitoxin, T-2 toxin, and fumonisin.
 
  3, use a mold remover.
 
  If the mycotoxin content of new corn is relatively high, a mycotoxin binder such as 立霉克 can be added to the feed to better ensure feed quality.
 
  The harms caused by mycotoxins are cumulative. Over a short period, their effects are mostly hidden. By the time symptoms become visible, the flock has already suffered losses. Therefore, poultry farmers should pay closer attention to mycotoxins and carefully manage corn procurement, so that the flock can be fed safe corn and the profitability of poultry farming can be maintained.