When market pressures mount, “cost reduction” is easily reduced to switching to cheaper feed, cutting health products, or squeezing labor costs. But feed costs account for around 65% of the total cost of pig production. This figure itself shows that the real room for savings lies not in “buying more cheaply,” but in “using more accurately.” How much of the feed a pig consumes is actually converted into weight gain is the fundamental question in cost control.

  Feed waste is greater than most people estimate. Waste during feeding can account for 10%—30% of total feed. Poorly designed feeders, filling feeders to capacity in one go, and adding feed too often during the nursery stage without clearing out leftovers all continually drive this figure up. A relatively direct improvement is to “feed smaller amounts more often”: feed nursery pigs once every 2 hours, ensuring no feed remains in the feeder before the next feeding; adjust feeder height and depth to the pigs’ size to reduce rooting and spillage; and use enclosed feed carts and bins during transfer to reduce spillage. There is room to lower the feed-to-meat ratio by 0.3—0.5 by reducing physical waste. This is more sustainable than repeatedly forcing down the feed price.

  At the formulation level, cost reduction is also not about “using poor-quality feed,” but about “using the right feed.” Low-protein dietstechnologyhas already provided fairly specific parameters: crude protein for late-stage finishing pigs can be reduced to 12%, and the proportion of soybean meal in the ration can be reduced to 8%. Replacing some corn and soybean meal with rapeseed meal, other oilseed meals, or locally available grains can save 150—200 yuan per pig in feed costs. The prerequisites are balanced amino acids and consistent raw material quality—not simply cutting protein levels across the board. Phase feeding is also important: using high-nutrition lactation feed for sows in early pregnancy not only increases costs but can also lead to subsequent problems with excessive body condition. In the late finishing stage, the formulation should be adjusted to meet fat deposition needs rather than feeding the same ration throughout.

  Energy use and veterinary drugs are two leaks that are easy to “overlook.” Switching barn lights, fans, and water pumps on and off as needed, and regularly inspecting water pipes and drinkers, can prevent leaks and drips from adding up to a significant amount on large-scale farms. In veterinary drug use, excessive preventive medication and “treating aggressively only after illness occurs” are two opposite extremes: continuously administering health products and antibiotics throughout the year both increases costs and disrupts the microbiota; while skipping basic immunization, after an outbreakTreatmentThe cost is far higher than the investment in prevention. Scheduled health care and health care during periods of stress, followed by diagnosis before targeted medication once illness occurs, are more reasonable than indiscriminately “using more” or “using less.”

  Managing labor costs does not mean simply cutting staff, either. Clearly defining responsibilities for feeding, manure removal, disinfection, pen inspections, and assisting with births can reduce buck-passing and duplicated work. Having one person consistently manage a stage of the process can lower labor costs per unit of output more effectively than simply reducing headcount. The bottom line in cost management is “not creating a greater loss in the name of saving money”—the sharp rise in the feed-to-meat ratio and losses from illness caused by poor-quality feed often far outweigh the small difference in unit price saved. Truly sustainable cost reduction means eliminating waste, fine-tuning the formula, and controlling energy consumption and medication use, rather than choosing the cheapest option at every step.